Страница:
to other machines on the local subnet. Use the netstat -rn
command on the NT server to confirm proper routing table entries
after you establish the RAS PPP to PPP link.
Enabling Routing of IP Packets on RAS Clients for NTAS V3.5
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters
IPEnableRouter
REG_DWORD:0x1 Enables IP routing
REG_DWORD:0x0 Disables IP routing
You must set the DisableOtherSrcPackets registry entry on RAS clients
if you want to route IP packets through that RAS client. This parameter
only affects forwarding of packets on the client side--this does not
affect the server.
Note: (I could not find this entry so I assume you must add it.)
The registry path for this entry is:
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RasArp\Parameters
DisableOtherSrcPackets
REG_DWORD:0x1 Disable IP packets from external sources
REG_DWORD:0x0 Enable IP packets from external sources
Controls the routing of IP packets with an IP source address other than
the IP address of the RAS network adapter card.
Set to 0 packets with source address other than the IP address of the
RAS adapter will be sent.
Set to 1 packets with source address other than the IP address of the
RAS adapter will not be sent.
Default: 1
We received the following message from Carl Byington with comments
on the use of Windows NT as a TCP/IP gateway with IP routing enable.
FROM: Carl Byington
TO: Steve Scoggins
DATE: 11/9/94 11:23 AM
Re: Routing with PPP works!
Well, it does work but there are some pitfalls.
We have a class C internet network that is subnetted, and my part of it uses the subnet mask
255.255.255.248 - that gives me 8 host addresses, 2 of which are loopback and broadcast so
I can have 6 hosts on my subnet, although I currently have only two machines. My host
addresses are .17 and .18 and the reserved ones are .16 and .23.
The .18 machine is the secondary machine without a modem. The .17 machine is the primary
machine with the modem and another IP address for the RAS link.
The RAS link uses IP addresses .9 (the Unix end) and .10 (my end). Note that this puts the
RAS link on a different network than my local ethernet.
I have SYSTEM/CurrentControlSet/Services/RasArp/Parameters/DisableOtherSrcPackets set
to 0 (I had to create this entry).
I have SYSTEM/CurrentControlSet/Services/Tcpip/Parameters/IPEnableRouter set to 1.
The configuration for .18 is
default gateway = .17
dns server address = .130
The configuration for .17 is
default gateway = .17
dns = none
The RAS configuration on .17 is
require specific IP address = .10
dns server address = .130
use default gateway on remote network
With that configuration, if I just boot .17, I can ping .18 but not .130 since we are not
connected yet. After bringing up the RAS link, I can ping .130 and the rest of the world.
HOWEVER, we are not done yet. Attempts to ping from .17 to .18 cause NT to die with the
blue screen. This is on the 807 debug build from MSDNII.
So we reboot .17 and this time set a static route to .18 with
'route add x.x.x.18 x.x.x.17'
reconnect the RAS link and everything works like a charm. Both .17 and .18 can ping the
world thru the RAS link, and both can run Mosaic. WHEE!!
It seems that the 'use default gateway on remote network' setting in the RAS tcp/ip dialog
overrides all the local routing unless you have static routes set. If the local network had a lot
of machines, that would be a real pain. In my case, I can just have the startup group run a
single route add command.
The other problem is that the route add does not work unless you are logged in with
administrator privileges, and it does not stick around between reboots. Therefore, after every
reboot, you need to log in as administrator and reset the local static routes. If you fail to do
this, then bringing up the ras link and pinging local machines kills your machine. Oh well, at
least the consequences are severe enough that the training time is fairly small.
Thank you very much for all your help with this!
==============================================================================
SECTION 5: Network Applications
==============================================================================
Q5-1: What winsock software works with Windows NT or NTAS Version 3.5?
You can use the Winsock Application FAQ, by Larsen Consulting as a
starting point for a list of winsock applications and where to find
them.
http://www.ramp.com/~lcs/faqhtml.html
(This will be moved to www.LCS.com sometime in the next two months)
Eudora
Email for SMTP and POP3
FTP//ftp.qualcomm.com/quest/eudora/windows/1.4/beta
filename eud143b4.exe
WinVn NNTP News Reader
FTP//titan.ksc.nasa.gov/pub/win3/winvn
filename winvn_92_5.zip
Trumpet NNTP News Reader
FTP//ftp.utas.edu.au/pub/pc/trumpet/winsock
file name wtwsk10a.zip
Cello
FTP//ftp.law.cornell/pub/L11/Cello
filename cello.zip
NCSA 32 bit Mosaic Client
FTP//ftp.ncsa.uiuc.edu/PC/Mosaic
filename wmos20a8.zip
Netscape Communications Corporation Netscape Navigator(TM) WWW Client
http://home.mcom.com/home/welcome.html
ftp://ftp.mcom.com/netscape/
Netscape Navigator for free evaluation, academic or non-profit use can be obtained via
anonymous FTP from ftp.mcom.com. Free evaluation use allows individuals to use the software
for the purpose of determining whether they want to purchase an ongoing software license.
Academic and non-profit use means that students, faculty and staff of educational institutions and
employees of non-profit organizations have unlimited free use of the software. Educational
institutions and non-profit organizations can also obtain a license free of charge to redistribute
Netscape Navigator to these individuals. Organizations or individuals wishing to use Netscape
Navigator for commercial purposes can purchase supported, licensed copies of Netscape
Navigator directly from Netscape Communications. Pricing starts at $39 for a single user license,
and volume discounts are available for right-to-copy licenses for multiple users.
Netscape Communications Corporation:
1-800-NETSITE (1-800-638-7483) (DOMESTIC)
1-415-428-4330 (INTERNATIONAL)
1-415-254-2693 (FAX)
info@mcom.com
sales@mcom.com
For data sheets and company information: litpak@mcom.com
For technical support: support@mcom.com
For Netscape Navigator software beta information: cbeta@mcom.com
To order our products: order@mcom.com
https://home.mcom.com/MCOM/ordering_docs/index.html
for training information: training@mcom.com
Spry Air Mosaic Client
http://www.spry.com/
file://ftp.spry.com/
WS_FTP32
FTP//129.29.64.246/pub/msdos
FTP//freebsd.cdrom.com/.5/cica/winsock
ws_ftp32.zip
The latest version of this application should always be the file
/pub/msdos/winsock.files/ws_ftp.zip on ftp.usma.edu (129.29.64.246).
To access it, enter 129.29.64.246 as the host name and check the
"anonymous login" box in the WS_FTP connect dialog box.
The latest version is usually uploaded winftp.cica.indiana.edu in
the /pub/PC/win3/winsock directory as ws_ftp.zip. A test Windows
NT version of this program may be found as follows:
ws_ftp32.zip on ftp.usma.edu.
Beta versions are only available from ftp.usma.edu in the
/pub/msdosdirectory as ws_ftp.zip.beta
Source code for the 93.12.05 version is in the file ws_ftp_s.zip
in the /pub/msdos/winsock.files directory on ftp.usma.edu.
==============================================================================
Q5-2: Where can I find Windows NT WWW or FTP sites with winsock files?
Windows NT FTP & WWW Sites
Microsoft Corporation World-Wide-Web Server
http://www.microsoft.com/
The latest Microsoft Windows NT 3.5 hardware compatibility list (HCL)
ftp://ftp.microsoft.com/bussys/winnt/winnt-docs/hcl/hcl35
California State University San Marcos Library Technical Services
(Great collection of Windows NT files!)
Windows NT WWW Page
http://coyote.csusm.edu/cwis/winworld/nt.html
Windows NT FTP server
ftp://coyote.csusm.edu/pub/winworld/nt
Digital's Home Page
http://www.dec.com/
Neat guide to internet application software for the
Digital Alpha AXP servers
http://www.digital.com/cgi-bin/www-swdev/PRODUCTS/CATALOG/catalog
The Advanced Systems User Group
http://128.150.146.76/ASUG.HTML
The Advanced Systems User Group is a Windows NT-only user group.
It was founded in August 1993 in Washington, DC.
Microsoft Chairman and CEO Bill Gates attended the first ASUG meeting
in October 1993. In it's first year the ASUG has grown to nearly 2,500 members.
They also have a Windows NT Bulletin Board System, located in Washington, DC
Dial: 202-244-1161 or 202-244-1168 (use 8N1)
All-Windows interface; true client-server, you haven't seen anything like this!
Rocky Mountain Windows NT Users Home Page
http://budman.cmdl.noaa.gov/RMWNTUG/RMWNTUG.HTM
Netscape Communications Home Page
http://home.mcom.com/
NASA Goddard Space Flight Center Windows NT and NT Advanced Server Information Page
http://ms-nic.gsfc.nasa.gov/Titles/WinNT.html
EMWAC Web Server
http://emwac.ed.ac.uk/html/top.html"
ftp://emwac.ed.ac.uk/
gopher://emwac.ed.ac.uk/
The European Microsoft Windows NT Academic Centre (EMWAC) is an integral part of the
Computing Services of the University of Edinburgh and has been set up to support and act as a
focus for Windows NT within academia. It is sponsored by Datalink Computers, Digital,
Microsoft, Research Machines, Sequent and the University of Edinburgh. This WWW Service is
provided from a Sequent WinServer running Windows NT.
EMWAC's Internet Toolchest for Windows NT
http://emwac.ed.ac.uk/html/internet_toolchest/top.html
The HTTP Server for Windows NT implements the HTTP/1.0 protocol. It runs as a Windows
NT "service", just like the FTP Server which comes with Windows NT. By analogy with the
UNIX HTTP server daemon which is called httpd, the Windows NT HTTP server service is
called https. The HTTP server service is configured using a Control Panel "applet".
(Note: you will also find a Freeware Gopher Server and WAIS Server at this URL.)
University of Karlsrruhe, Germany NT Support Center
http://jerusalem.windows-nt.uni-karlsruhe.de/english.htm
WINDOWS NT Information - Main Menu- Stuttgart
Germany,http://www.informatik.uni-stuttgart.de/misc/nt/nt.html
http://raj-server.srv.cs.cmu.edu/
TELNET Server for Windows NT on Intel
Ataman Software makes a shareware telnetd for Windows
NT (it comes bundled with rlogind and rexecd). You can pick up
the unregistered version via anonymous ftp from:
ftp://utahwired.com:/users/ataman/products/
filename atrls13i.zip (Intel)
atrls13a.zip (Alpha AXP)
It can also be found in the WUGNET CompuServe Forum, keyword TELNETD
Archie client for Windows NT
ftp://freebsd.cdrom.com/.5/cica/winsock/wsarch06.zip
GNU binaries for Windows NT
ftp://ftp.cc.utexas.edu/microlib/nt/gnu
TCP/IP files for Windows NT
ftp://ftp.cc.utexas.edu/microlib/win/tcpip
Sendmail for Windows NT
WinNT's Blat ver 1.0
gepasi.dbs.aber.ac.uk:/blat10.zip
ftp.cica.indiana.edu:/pub/pc/win3/nt/blat10.zip
Some other interesting Winsock Internet Sites
--------------------------------------------------------------------
Winsock Application FAQ - Larsen Consulting
(An extensive guide to Winsock applications)
If you are looking to see what has been released/updated within
the last 20 days (and is FTP'able), point your WWW client to:
http://www.LCS.com/newfaq.html
To peruse the entire listing of FTP'able Winsock Applications:
http://www.LCS.com/faqhtml.html
--------------------------------------------------------------------
ftp://ftp.cica.indiana.edu/pub/pc/win3/winsock
ftp://ftp.wustl.edu/systems/ibmpc/win3/winsock
ftp://ftp.halcyon.com/disk2/tiskwin
ftp://nigel.msen.com/pub/systems/ms-windows/networking/winsock/apps
ftp://dorm.rutgers.edu/pub/msdos/winsock/apps
ftp://ucselx.sdsu.edu/pub/ibm/winsock
ftp://dime.cs.umass.edu/pub/rcf/opine-dist/msdos/winsock
ftp://risc.ua.edu/pub/network/winsock
ftp://ftp.uga.edu/pub/msdos/mirror/winsock
==============================================================================
Q5-3: Where can I find internet application software for the
Digital Alpha AXP servers
http://www.digital.com/cgi-bin/www-swdev/PRODUCTS/CATALOG/catalog
==============================================================================
Q5-4: Where can I get NFS for NT?
NFS Server for Windows NT.
Email sales@bws.com for more information
Beame & Whiteside Software, Inc.
Ph: 919-831-8989
706 Hillsborough St.
FAX: 919-831-8990
Raleigh, NC 27603-1655
Intergraph Corporation
One Madison Industrial Park CR1102
Huntsville, AL United States 35894
Contact: John Allen
Phone: (205) 730-6112
Application: PC-NFS for Windows NT V2.0
Operating System: NT
Status: QTR4 CY1994
Description: A co-development effort of Sun Select and
Intergraph Corporation. Provides Windows NT users with
network access to files on UNIX and other systems acting
as NFS servers.
The Intergraph Corporation NFS solution includes two products:
PC-NFS for Windows NT and DiskShare for Windows NT.
The X Window System server is called eXalt.
These products promote open communication and
NT Advanced Server, and UNIX operating systems
WWW home page for Intergraph
http://www.intergraph.com/
by electronic mail:
info@intergraph.com
by telephone from the U.S.:
information:1-800-345-4856
support:1-800-633-7248
training 1-800-240-4300
regional sales information:1-800-240-1000
==============================================================================
SUBSECTION 5A: Server
==============================================================================
Q5A-1: Where can I find a WWW server for NT?
ftp://nigel.msen.com/pub/packages/infosystems/www/servers/https/hsi386.zip
ftp://ftp.cica.indiana.edu/pub/pc/win3/winsock/serweb03.zip
ftp://freebsd.cdrom.com/.5/cica/winsock/serweb03.zip
==============================================================================
Q5A-2: I have heard that it is possible to create HTML pages with
MS-Word, is there a template, or a set of macros for that purpose. Does any
of you know of such templates/macros, and where can they be found?
You can use CU_HTML which is available via anonymous
ftp from ftp.cuhk.hk in the directory /pub/www/windows/util. It's
a document template for Word 2 or 6. It's well integrated with Word
and includes its own tool bar for commonly used html statements.
==============================================================================
Q5A-3: What TELNET Servers are commerically available for Windows NT on
Intel?
Alex Miller (amm@netcom.com) wrote:
My company (Ataman Software) makes a shareware telnetd for Windows
NT (it comes bundled with rlogind and rexecd). You can pick up
the unregistered version via anonymous ftp from:
utahwired.com:/users/ataman/products/
atrls13i.zip (Intel)
atrls13a.zip (Alpha AXP)
It can also be found in the Windows NT section of America Online and
the WINSHARE, WUGNET, and MSWIN32 forums on CompuServe (search for
keyword TELNETD).
==============================================================================
SUBSECTION 5B: Client
==============================================================================
Q5B-1: Does anyone know if there is a program which allows you to send
SMTP mail from the command prompt on NT?
Pedro Mendes, (prm@aber.ac.uk) just finished making one such program,
and it is freeware, see below:
WinNT's Blat ver 1.0 has been uploaded to the following FTP sites:
gepasi.dbs.aber.ac.uk:/blat10.zip
ftp.cica.indiana.edu:/pub/pc/win3/nt/blat10.zip
Distributions are in the form of .ZIP files, be sure to user binary
mode FTP to do the transfer.
Blat is a command line SMTP mail client for Windows NT, originally by
Mark Neal and Pedro Mendes. A great part of the code in this program
was produced by the WinVN team (including GENSOCK.DLL).
Both source code and binaries for intel 80486 are distributed.
Recompile the source code if you need it for a different
architecture.
below is a description of the program:
Blat is a Public Domain (generous aren't we?) Windows NT console utility which
will e-mail a file to a user via SMTP. The program requires the "gensock" DLL
(borrowed from WinVN). A Registry entry is generated when the program is used
with the -SMTP flag. This stores the address of the SMTP server, and the
address of the _default_ sender (this may be overridden with the -f flag).
Impersonation can be done with the -i flag which puts the value specified in
place of the senders address in the "From:" line of the header, however if this
is done the real senders address is stamped in the "Reply-To:" and "Sender:"
lines. This can be useful when using the program to send message from NT users
that are not registered on the SMTP host.
SYNTAX:
Blat [-s ] -t -f
-c [-i ]
Blat -SMTP
Blat -SMTP
Blat -h
-SMTP: address of SMTP server,
-SMTP : address of SMTP host, default sender
: the file with the message body,
-s: the (optional) subject line,
-t: the recipient's address(es),
-t: address(es) for carbon copies,
-f: the sender's address (must be known to the SMTP server),
-i : a 'From:' address, not necessarily known to the SMTP server.
-h: this help.
==============================================================================
Q5B-2: Where can I find an archie client for NT?
ftp://freebsd.cdrom.com/.5/cica/winsock/wsarch06.zip
==============================================================================
Q5B-3: Where can I find a rsh for Windows NT to use with a UNIX host?
William Cheung (wcheung@ee.ubc.ca) has developed a program called
WinRSH/WinRSH32 - Remote Shell for Windows 1.6
This is an eighth release of WinRSH - Remote Shell for Windows
The following details what are fixed/improved in this version:
WinRSH 1.6:
1. Added a message bar to display messages internal to WinRSH.
2. Fixed occasional screen garbling bugs.
3. Disconnection from the remote host is now more responsive.
4. Fixed a bug in not able to check the "Log to File" menu once it
is unchecked.
5. The source code is now distributed as part of WinRSH in the SRC
directory under the GNU licenses and agreements.
For those who don't know what WinRSH is...
WinRSH contains a very simple user interface to allow a Window's
user to run a program remotely on your workstation using either the
RSH daemon or the REXEC daemon. The results of the remote execution
are then displayed in a scrollable window.
The following is an excerpt from readme.txt included in the
distribution.
WinRSH - Remote Shell for Windows 1.6
WinRSH32 - Remote Shell for Windows 1.6
Written by William Cheung (wcheung@ee.ubc.ca)
Copyright (C) 1994 William Cheung
All Rights Reserved.
WinRSH/WinRSH32 is free software; you can redistribute it in its entirety
in any form you like. If you find any bugs, feel free to send me an
email at wcheung@ee.ubc.ca. Please read "license.txt" for GNU licensing
information. If you have added new features to WinRSH, please send me
all the source code modifications, including the version of WinRSH that
you are based on. Your additions may benefit other users.
Requirements
o An IBM-PC or compatible computer using 386 or above CPU with at
least 4 MB RAM.
o Window Socket installed properly.
o A host supporting at least one of RSH or REXEC daemon.
Downloading Instructions
You can now ftp WinRSH from datacom.ee.ubc.ca [137.82.57.20]. Login
as an anonymous user and change directory to /pub/pc/winsock. The
file is called wrsh16.zip.
==============================================================================
END Windows NT Internet FAQ
==============================================================================
command on the NT server to confirm proper routing table entries
after you establish the RAS PPP to PPP link.
Enabling Routing of IP Packets on RAS Clients for NTAS V3.5
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters
IPEnableRouter
REG_DWORD:0x1 Enables IP routing
REG_DWORD:0x0 Disables IP routing
You must set the DisableOtherSrcPackets registry entry on RAS clients
if you want to route IP packets through that RAS client. This parameter
only affects forwarding of packets on the client side--this does not
affect the server.
Note: (I could not find this entry so I assume you must add it.)
The registry path for this entry is:
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RasArp\Parameters
DisableOtherSrcPackets
REG_DWORD:0x1 Disable IP packets from external sources
REG_DWORD:0x0 Enable IP packets from external sources
Controls the routing of IP packets with an IP source address other than
the IP address of the RAS network adapter card.
Set to 0 packets with source address other than the IP address of the
RAS adapter will be sent.
Set to 1 packets with source address other than the IP address of the
RAS adapter will not be sent.
Default: 1
We received the following message from Carl Byington with comments
on the use of Windows NT as a TCP/IP gateway with IP routing enable.
FROM: Carl Byington
TO: Steve Scoggins
DATE: 11/9/94 11:23 AM
Re: Routing with PPP works!
Well, it does work but there are some pitfalls.
We have a class C internet network that is subnetted, and my part of it uses the subnet mask
255.255.255.248 - that gives me 8 host addresses, 2 of which are loopback and broadcast so
I can have 6 hosts on my subnet, although I currently have only two machines. My host
addresses are .17 and .18 and the reserved ones are .16 and .23.
The .18 machine is the secondary machine without a modem. The .17 machine is the primary
machine with the modem and another IP address for the RAS link.
The RAS link uses IP addresses .9 (the Unix end) and .10 (my end). Note that this puts the
RAS link on a different network than my local ethernet.
I have SYSTEM/CurrentControlSet/Services/RasArp/Parameters/DisableOtherSrcPackets set
to 0 (I had to create this entry).
I have SYSTEM/CurrentControlSet/Services/Tcpip/Parameters/IPEnableRouter set to 1.
The configuration for .18 is
default gateway = .17
dns server address = .130
The configuration for .17 is
default gateway = .17
dns = none
The RAS configuration on .17 is
require specific IP address = .10
dns server address = .130
use default gateway on remote network
With that configuration, if I just boot .17, I can ping .18 but not .130 since we are not
connected yet. After bringing up the RAS link, I can ping .130 and the rest of the world.
HOWEVER, we are not done yet. Attempts to ping from .17 to .18 cause NT to die with the
blue screen. This is on the 807 debug build from MSDNII.
So we reboot .17 and this time set a static route to .18 with
'route add x.x.x.18 x.x.x.17'
reconnect the RAS link and everything works like a charm. Both .17 and .18 can ping the
world thru the RAS link, and both can run Mosaic. WHEE!!
It seems that the 'use default gateway on remote network' setting in the RAS tcp/ip dialog
overrides all the local routing unless you have static routes set. If the local network had a lot
of machines, that would be a real pain. In my case, I can just have the startup group run a
single route add command.
The other problem is that the route add does not work unless you are logged in with
administrator privileges, and it does not stick around between reboots. Therefore, after every
reboot, you need to log in as administrator and reset the local static routes. If you fail to do
this, then bringing up the ras link and pinging local machines kills your machine. Oh well, at
least the consequences are severe enough that the training time is fairly small.
Thank you very much for all your help with this!
==============================================================================
SECTION 5: Network Applications
==============================================================================
Q5-1: What winsock software works with Windows NT or NTAS Version 3.5?
You can use the Winsock Application FAQ, by Larsen Consulting as a
starting point for a list of winsock applications and where to find
them.
http://www.ramp.com/~lcs/faqhtml.html
(This will be moved to www.LCS.com sometime in the next two months)
Eudora
Email for SMTP and POP3
FTP//ftp.qualcomm.com/quest/eudora/windows/1.4/beta
filename eud143b4.exe
WinVn NNTP News Reader
FTP//titan.ksc.nasa.gov/pub/win3/winvn
filename winvn_92_5.zip
Trumpet NNTP News Reader
FTP//ftp.utas.edu.au/pub/pc/trumpet/winsock
file name wtwsk10a.zip
Cello
FTP//ftp.law.cornell/pub/L11/Cello
filename cello.zip
NCSA 32 bit Mosaic Client
FTP//ftp.ncsa.uiuc.edu/PC/Mosaic
filename wmos20a8.zip
Netscape Communications Corporation Netscape Navigator(TM) WWW Client
http://home.mcom.com/home/welcome.html
ftp://ftp.mcom.com/netscape/
Netscape Navigator for free evaluation, academic or non-profit use can be obtained via
anonymous FTP from ftp.mcom.com. Free evaluation use allows individuals to use the software
for the purpose of determining whether they want to purchase an ongoing software license.
Academic and non-profit use means that students, faculty and staff of educational institutions and
employees of non-profit organizations have unlimited free use of the software. Educational
institutions and non-profit organizations can also obtain a license free of charge to redistribute
Netscape Navigator to these individuals. Organizations or individuals wishing to use Netscape
Navigator for commercial purposes can purchase supported, licensed copies of Netscape
Navigator directly from Netscape Communications. Pricing starts at $39 for a single user license,
and volume discounts are available for right-to-copy licenses for multiple users.
Netscape Communications Corporation:
1-800-NETSITE (1-800-638-7483) (DOMESTIC)
1-415-428-4330 (INTERNATIONAL)
1-415-254-2693 (FAX)
info@mcom.com
sales@mcom.com
For data sheets and company information: litpak@mcom.com
For technical support: support@mcom.com
For Netscape Navigator software beta information: cbeta@mcom.com
To order our products: order@mcom.com
https://home.mcom.com/MCOM/ordering_docs/index.html
for training information: training@mcom.com
Spry Air Mosaic Client
http://www.spry.com/
file://ftp.spry.com/
WS_FTP32
FTP//129.29.64.246/pub/msdos
FTP//freebsd.cdrom.com/.5/cica/winsock
ws_ftp32.zip
The latest version of this application should always be the file
/pub/msdos/winsock.files/ws_ftp.zip on ftp.usma.edu (129.29.64.246).
To access it, enter 129.29.64.246 as the host name and check the
"anonymous login" box in the WS_FTP connect dialog box.
The latest version is usually uploaded winftp.cica.indiana.edu in
the /pub/PC/win3/winsock directory as ws_ftp.zip. A test Windows
NT version of this program may be found as follows:
ws_ftp32.zip on ftp.usma.edu.
Beta versions are only available from ftp.usma.edu in the
/pub/msdosdirectory as ws_ftp.zip.beta
Source code for the 93.12.05 version is in the file ws_ftp_s.zip
in the /pub/msdos/winsock.files directory on ftp.usma.edu.
==============================================================================
Q5-2: Where can I find Windows NT WWW or FTP sites with winsock files?
Windows NT FTP & WWW Sites
Microsoft Corporation World-Wide-Web Server
http://www.microsoft.com/
The latest Microsoft Windows NT 3.5 hardware compatibility list (HCL)
ftp://ftp.microsoft.com/bussys/winnt/winnt-docs/hcl/hcl35
California State University San Marcos Library Technical Services
(Great collection of Windows NT files!)
Windows NT WWW Page
http://coyote.csusm.edu/cwis/winworld/nt.html
Windows NT FTP server
ftp://coyote.csusm.edu/pub/winworld/nt
Digital's Home Page
http://www.dec.com/
Neat guide to internet application software for the
Digital Alpha AXP servers
http://www.digital.com/cgi-bin/www-swdev/PRODUCTS/CATALOG/catalog
The Advanced Systems User Group
http://128.150.146.76/ASUG.HTML
The Advanced Systems User Group is a Windows NT-only user group.
It was founded in August 1993 in Washington, DC.
Microsoft Chairman and CEO Bill Gates attended the first ASUG meeting
in October 1993. In it's first year the ASUG has grown to nearly 2,500 members.
They also have a Windows NT Bulletin Board System, located in Washington, DC
Dial: 202-244-1161 or 202-244-1168 (use 8N1)
All-Windows interface; true client-server, you haven't seen anything like this!
Rocky Mountain Windows NT Users Home Page
http://budman.cmdl.noaa.gov/RMWNTUG/RMWNTUG.HTM
Netscape Communications Home Page
http://home.mcom.com/
NASA Goddard Space Flight Center Windows NT and NT Advanced Server Information Page
http://ms-nic.gsfc.nasa.gov/Titles/WinNT.html
EMWAC Web Server
http://emwac.ed.ac.uk/html/top.html"
ftp://emwac.ed.ac.uk/
gopher://emwac.ed.ac.uk/
The European Microsoft Windows NT Academic Centre (EMWAC) is an integral part of the
Computing Services of the University of Edinburgh and has been set up to support and act as a
focus for Windows NT within academia. It is sponsored by Datalink Computers, Digital,
Microsoft, Research Machines, Sequent and the University of Edinburgh. This WWW Service is
provided from a Sequent WinServer running Windows NT.
EMWAC's Internet Toolchest for Windows NT
http://emwac.ed.ac.uk/html/internet_toolchest/top.html
The HTTP Server for Windows NT implements the HTTP/1.0 protocol. It runs as a Windows
NT "service", just like the FTP Server which comes with Windows NT. By analogy with the
UNIX HTTP server daemon which is called httpd, the Windows NT HTTP server service is
called https. The HTTP server service is configured using a Control Panel "applet".
(Note: you will also find a Freeware Gopher Server and WAIS Server at this URL.)
University of Karlsrruhe, Germany NT Support Center
http://jerusalem.windows-nt.uni-karlsruhe.de/english.htm
WINDOWS NT Information - Main Menu- Stuttgart
Germany,http://www.informatik.uni-stuttgart.de/misc/nt/nt.html
http://raj-server.srv.cs.cmu.edu/
TELNET Server for Windows NT on Intel
Ataman Software makes a shareware telnetd for Windows
NT (it comes bundled with rlogind and rexecd). You can pick up
the unregistered version via anonymous ftp from:
ftp://utahwired.com:/users/ataman/products/
filename atrls13i.zip (Intel)
atrls13a.zip (Alpha AXP)
It can also be found in the WUGNET CompuServe Forum, keyword TELNETD
Archie client for Windows NT
ftp://freebsd.cdrom.com/.5/cica/winsock/wsarch06.zip
GNU binaries for Windows NT
ftp://ftp.cc.utexas.edu/microlib/nt/gnu
TCP/IP files for Windows NT
ftp://ftp.cc.utexas.edu/microlib/win/tcpip
Sendmail for Windows NT
WinNT's Blat ver 1.0
gepasi.dbs.aber.ac.uk:/blat10.zip
ftp.cica.indiana.edu:/pub/pc/win3/nt/blat10.zip
Some other interesting Winsock Internet Sites
--------------------------------------------------------------------
Winsock Application FAQ - Larsen Consulting
(An extensive guide to Winsock applications)
If you are looking to see what has been released/updated within
the last 20 days (and is FTP'able), point your WWW client to:
http://www.LCS.com/newfaq.html
To peruse the entire listing of FTP'able Winsock Applications:
http://www.LCS.com/faqhtml.html
--------------------------------------------------------------------
ftp://ftp.cica.indiana.edu/pub/pc/win3/winsock
ftp://ftp.wustl.edu/systems/ibmpc/win3/winsock
ftp://ftp.halcyon.com/disk2/tiskwin
ftp://nigel.msen.com/pub/systems/ms-windows/networking/winsock/apps
ftp://dorm.rutgers.edu/pub/msdos/winsock/apps
ftp://ucselx.sdsu.edu/pub/ibm/winsock
ftp://dime.cs.umass.edu/pub/rcf/opine-dist/msdos/winsock
ftp://risc.ua.edu/pub/network/winsock
ftp://ftp.uga.edu/pub/msdos/mirror/winsock
==============================================================================
Q5-3: Where can I find internet application software for the
Digital Alpha AXP servers
http://www.digital.com/cgi-bin/www-swdev/PRODUCTS/CATALOG/catalog
==============================================================================
Q5-4: Where can I get NFS for NT?
NFS Server for Windows NT.
Email sales@bws.com for more information
Beame & Whiteside Software, Inc.
Ph: 919-831-8989
706 Hillsborough St.
FAX: 919-831-8990
Raleigh, NC 27603-1655
Intergraph Corporation
One Madison Industrial Park CR1102
Huntsville, AL United States 35894
Contact: John Allen
Phone: (205) 730-6112
Application: PC-NFS for Windows NT V2.0
Operating System: NT
Status: QTR4 CY1994
Description: A co-development effort of Sun Select and
Intergraph Corporation. Provides Windows NT users with
network access to files on UNIX and other systems acting
as NFS servers.
The Intergraph Corporation NFS solution includes two products:
PC-NFS for Windows NT and DiskShare for Windows NT.
The X Window System server is called eXalt.
These products promote open communication and
NT Advanced Server, and UNIX operating systems
WWW home page for Intergraph
http://www.intergraph.com/
by electronic mail:
info@intergraph.com
by telephone from the U.S.:
information:1-800-345-4856
support:1-800-633-7248
training 1-800-240-4300
regional sales information:1-800-240-1000
==============================================================================
SUBSECTION 5A: Server
==============================================================================
Q5A-1: Where can I find a WWW server for NT?
ftp://nigel.msen.com/pub/packages/infosystems/www/servers/https/hsi386.zip
ftp://ftp.cica.indiana.edu/pub/pc/win3/winsock/serweb03.zip
ftp://freebsd.cdrom.com/.5/cica/winsock/serweb03.zip
==============================================================================
Q5A-2: I have heard that it is possible to create HTML pages with
MS-Word, is there a template, or a set of macros for that purpose. Does any
of you know of such templates/macros, and where can they be found?
You can use CU_HTML which is available via anonymous
ftp from ftp.cuhk.hk in the directory /pub/www/windows/util. It's
a document template for Word 2 or 6. It's well integrated with Word
and includes its own tool bar for commonly used html statements.
==============================================================================
Q5A-3: What TELNET Servers are commerically available for Windows NT on
Intel?
Alex Miller (amm@netcom.com) wrote:
My company (Ataman Software) makes a shareware telnetd for Windows
NT (it comes bundled with rlogind and rexecd). You can pick up
the unregistered version via anonymous ftp from:
utahwired.com:/users/ataman/products/
atrls13i.zip (Intel)
atrls13a.zip (Alpha AXP)
It can also be found in the Windows NT section of America Online and
the WINSHARE, WUGNET, and MSWIN32 forums on CompuServe (search for
keyword TELNETD).
==============================================================================
SUBSECTION 5B: Client
==============================================================================
Q5B-1: Does anyone know if there is a program which allows you to send
SMTP mail from the command prompt on NT?
Pedro Mendes, (prm@aber.ac.uk) just finished making one such program,
and it is freeware, see below:
WinNT's Blat ver 1.0 has been uploaded to the following FTP sites:
gepasi.dbs.aber.ac.uk:/blat10.zip
ftp.cica.indiana.edu:/pub/pc/win3/nt/blat10.zip
Distributions are in the form of .ZIP files, be sure to user binary
mode FTP to do the transfer.
Blat is a command line SMTP mail client for Windows NT, originally by
Mark Neal and Pedro Mendes. A great part of the code in this program
was produced by the WinVN team (including GENSOCK.DLL).
Both source code and binaries for intel 80486 are distributed.
Recompile the source code if you need it for a different
architecture.
below is a description of the program:
Blat is a Public Domain (generous aren't we?) Windows NT console utility which
will e-mail a file to a user via SMTP. The program requires the "gensock" DLL
(borrowed from WinVN). A Registry entry is generated when the program is used
with the -SMTP flag. This stores the address of the SMTP server, and the
address of the _default_ sender (this may be overridden with the -f flag).
Impersonation can be done with the -i flag which puts the value specified in
place of the senders address in the "From:" line of the header, however if this
is done the real senders address is stamped in the "Reply-To:" and "Sender:"
lines. This can be useful when using the program to send message from NT users
that are not registered on the SMTP host.
SYNTAX:
Blat
-c
Blat -SMTP
Blat -SMTP
Blat -h
-SMTP
-SMTP
-s
-t
-t
-f
-i : a 'From:' address, not necessarily known to the SMTP server.
-h: this help.
==============================================================================
Q5B-2: Where can I find an archie client for NT?
ftp://freebsd.cdrom.com/.5/cica/winsock/wsarch06.zip
==============================================================================
Q5B-3: Where can I find a rsh for Windows NT to use with a UNIX host?
William Cheung (wcheung@ee.ubc.ca) has developed a program called
WinRSH/WinRSH32 - Remote Shell for Windows 1.6
This is an eighth release of WinRSH - Remote Shell for Windows
The following details what are fixed/improved in this version:
WinRSH 1.6:
1. Added a message bar to display messages internal to WinRSH.
2. Fixed occasional screen garbling bugs.
3. Disconnection from the remote host is now more responsive.
4. Fixed a bug in not able to check the "Log to File" menu once it
is unchecked.
5. The source code is now distributed as part of WinRSH in the SRC
directory under the GNU licenses and agreements.
For those who don't know what WinRSH is...
WinRSH contains a very simple user interface to allow a Window's
user to run a program remotely on your workstation using either the
RSH daemon or the REXEC daemon. The results of the remote execution
are then displayed in a scrollable window.
The following is an excerpt from readme.txt included in the
distribution.
WinRSH - Remote Shell for Windows 1.6
WinRSH32 - Remote Shell for Windows 1.6
Written by William Cheung (wcheung@ee.ubc.ca)
Copyright (C) 1994 William Cheung
All Rights Reserved.
WinRSH/WinRSH32 is free software; you can redistribute it in its entirety
in any form you like. If you find any bugs, feel free to send me an
email at wcheung@ee.ubc.ca. Please read "license.txt" for GNU licensing
information. If you have added new features to WinRSH, please send me
all the source code modifications, including the version of WinRSH that
you are based on. Your additions may benefit other users.
Requirements
o An IBM-PC or compatible computer using 386 or above CPU with at
least 4 MB RAM.
o Window Socket installed properly.
o A host supporting at least one of RSH or REXEC daemon.
Downloading Instructions
You can now ftp WinRSH from datacom.ee.ubc.ca [137.82.57.20]. Login
as an anonymous user and change directory to /pub/pc/winsock. The
file is called wrsh16.zip.
==============================================================================
END Windows NT Internet FAQ
==============================================================================